Views:5 Author:Site Editor Publish Time: 2019-08-08 Origin:Site
Detailed explanation of the oil filter replacement steps for you
Discharge waste engine oil
First discharge the waste engine oil in the fuel tank, place the old oil container under the oil pan, open the oil drain bolt, and discharge the waste oil. When draining the oil, try to let the oil drip for a while, and ensure that the waste oil is discharged clean. When the oil is used, it will produce a lot of impurities. If the discharge is not clean when it is replaced, it will easily block the oil passage, resulting in poor oil supply and structural wear.we are premium BMW oil filter factory and premium chevrolet oil filter wholesale,you can know it.
2.Remove the old oil filter
Move the old oil container under the filter and remove the old filter. Be careful not to let the waste oil stain the inside of the machine. Filter
3.Preparation of the oil filter before installation
There are two ways to install the oil filter. The common one is vertical installation, and there are many small digging machines that are installed horizontally. The installation method is different, so the filling of the oil is divided into two cases: firstly, the vertically installed oil filter is connected to the oil pump through a pipeline. This installation method generally recommends that the user change the oil filter to the filter. Filled with oil.
If the new oil filter is not filled with oil, air resistance will be generated inside the new filter element. When the vehicle is in the vehicle, the internal lubrication of the machine will be lack of oil for a short period of time, which will cause structural parts to wear. The advantage of the vertical installation is that the filter element has a better seal and there is very little oil leakage.
4.Install a new oil filter
Check the oil outlet of the oil filter installation position to clean the dirt and residual waste oil. Before installation, first put a sealing ring on the oil outlet, then slowly screw the new oil filter off. Pay attention to the oil filter not to be tightened too much. Generally, after tightening by hand, use it again. The wrench can be screwed 3/4 turns. When installing a new filter element, do not use excessive force on the wrench, otherwise it will easily damage the seal ring inside the filter element, resulting in poor sealing effect and no filtering effect!
5.Fill the engine oil tank with new oil
Finally, inject new oil into the oil tank and, if necessary, use a funnel to prevent the oil from falling outside the engine. After the filling is completed, check the lower part of the engine for leaks. If there is no leak, check the oil dipstick and see if the oil is added to the line. We recommend adding it to the line. During the daily work, everyone should also check the dipstick regularly. If the oil is less than the lower line, it should be replenished in time.we are premium BMW oil filter factory and premium chevrolet oil filter wholesale,you can know it.
We have a high-quality marketing team that unites and cooperates and develops with courage. We operate with excellent service, flexible and effective way, adhering to the business philosophy of "survive by strength, develop by reputation", with "integrity management, mutual benefit and common development". "As a principle, we are willing to provide more excellent and more professional services for the new and old customers, and create a better tomorrow. Welcome customers to come and negotiate business!