• Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
You are here: Home / Products / Oil Filter / Ford / Ford_Oil Filter_Edge_Ranger_BE8Z 6731 AB
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search

Product Detail

Share to:

Ford_Oil Filter_Edge_Ranger_BE8Z 6731 AB

and even cause burning. Was holding the shaft accident.we are oil filter wholesale and best oil filter china,you can know it.


Car oil filter use precautions

The oil filter of the engine lubrication system is the first level to prevent impurities from entering the lubricating oil circuit. If improper use is maintained, it is easy to cause blockage, intake and filtration failure, increase the wear of the friction pair of the lubrication system, and even cause burning. Was holding the shaft accident.we are oil filter wholesale and best oil filter china,you can know it.

1.Filter quality should be qualified filter

Choose a strong copper and wire filter, and do not use a soft plastic filter. If the filter is too soft, or the plastic filter becomes soft after the machine temperature rises, the circular plug at the center of the filter will be adsorbed at the oil inlet hole, so that the amount of oil entering the oil pump is reduced, the oil pressure is reduced, and it is easy to appear. Burning tile accident.

2.Filter installation should be smooth

Install the filter so that the filter is level in the oil pan and submerged under the oil level. If the filter is lifted when installed, the filter may expose the oil surface when the motor vehicle is bumpy and up and down. The oil pump draws in air, the oil pressure fluctuates, and the amount of lubricating oil on the friction surface is insufficient, which is easy to produce sticky wear. In addition, the warpage of the oil filter is likely to cause the big end of the connecting rod to collide with the filter and make a sound.

3.Do not drain the filter gasket

The filter should be intact and the filter gasket must not be leaked and kept intact. Otherwise, the impurities enter the lubricating oil path as it is, and the oil collecting filter is ineffective.

4. Hollow bolts should be in good condition

Hollow bolts must not have slips, cracks, etc., so as to avoid the formation of steam resistance by the intake air in the oil pump.

5.The gasket should be sealed

The two sealed copper gaskets on the hollow tube bolts of the filter tube are indispensable, and they are kept flat and effectively sealed. They should not be replaced by iron gaskets. If the gasket is deformed or roughened or hardened, it should be replaced in time or placed on a flat plate with a fine abrasive cloth. The hardened copper gasket can also be placed in a fire to burn red, and then placed in water to cool it to make it soft.

6. The inside of the body should be cleaned

After the oil in the oil pan is dirty and deteriorated, it should be cleaned and replaced in time to reduce the filter resistance of the filter and avoid the accident of burning the shaft due to the blockage of the filter.

Product Name: Oil Fiter

Brand Name: RSD

Warranty: 1 Years

Certification: ISO/TS16949

Car Model: Ford

OE NO.: BE8Z 6731 AB

Material: Filter Paper & Metal

Application: Engine Parts

Package: Neutral Packing

Quality: High-Quality

OEM: Acceptable

MOQ: 2000pcs

Q1: What's the MOQ?

A:1. Oil filter with metal: MOQ=2000pcs

2.Oil filter without metal: MOQ=2000pcs

3. Air filter: MOQ=2000pcs

4. Cabin filter: MOQ=2000pcs

Q2. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q3. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q4. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

Q5. How about your delivery time?

A: Generally, it will take 15-30days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q6. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q7. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.

Q8. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

Q9. What’s our shipping ways?

A: By sea, air, land.

Q10: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Copyright  2018  RSD Auto Parts
Sitemap   |   Support By Leadong