• Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
You are here: Home / Products / Oil Filter / Ford / Ford_Oil Filter_Kuga 1.6T_Escape_Mondeo 1.5T_BM5G 6714 AA
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search

Product Detail

Share to:

Ford_Oil Filter_Kuga 1.6T_Escape_Mondeo 1.5T_BM5G 6714 AA

reduce equipment maintenance costs and extend system life.we are oil filter wholesale and best oil filter china,you can know it.


Filter blockage analysis

The filter acts primarily to filter particles, impurities, and moisture entering the engine system. Reasonable selection of high-performance regular brand filters is one of the effective measures for users to replace filter protection, reduce equipment maintenance costs and extend system life.we are oil filter wholesale and best oil filter china,you can know it.

Harm of inferior filter:

The rated flow is insufficient. The filter is overloaded for a long time and has a short service life.

The filter paper has large aperture, poor uniformity and low filtration efficiency, which causes early wear of the common rail system.

The water separation fails, the common rail components are rusted, the adhesive is not resistant to oil, and the bonding is not firm. Causes the filter to be short-circuited and cannot filter out impurities. Shorten the service life of the common rail system.

The inner rubber seal of the filter is not resistant to oil and the seal is invalid. A short circuit is formed, and impurities cannot be filtered out, resulting in early wear of the common rail system.

The fuel filter heating and oil-water separation electrical joints fail and the circuit is damaged. The fuel filter heating fails, and the system performance and starting are affected at low temperatures.

The impact of the inferior filter on the engine is recessive and may not be detected immediately, but it will be too late when the damage accumulates to a certain extent.

The measure of filter quality is not only the life of the filter, but more importantly the filtration efficiency of the filter. If a filter with low filtration efficiency is used, it does not matter if it is replaced frequently. Since the diesel contains water, while maintaining the maintenance of the conventional filter, it is important to periodically discharge the filter during use.

Engine oil is constantly contaminated by metal chips, dust in the air, and carbon deposits during use. The heavy impurities are deposited at the bottom of the oil sump, and lightly enters the friction surfaces with the lubricating oil, causing early wear of the machine parts. The function of the oil filter is to filter the dirt through the filter. After the filter has been used for a certain period of time, a lot of dirt will adhere to the filter, so the filter should be replaced regularly. In general, the oil filter and oil should be replaced at the same time. This will help to extend the life of the engine.

Use a filter wrench or a suitable tool to remove the filter to prevent damage to the threaded joints. Check and clean the oil filter mounting surface. Otherwise, oil leakage may occur after installation, resulting in insufficient oil supply. When installing the oil filter, apply a layer of oil to the surface of the seal to ensure reliable sealing and prevent damage to the seal.

Keeping the filter clean is a concern for any product. Today's filters use paper filters. The outer casing is sealed with relatively hard plastic and is a consumable item. Blockage in the filter causes the oil to flow poorly, causing the temperature inside the filter to rise. Therefore, we can observe the internal oil rise from the casing to judge whether the filter is clogged.

Product Name: Oil Fiter

Brand Name: RSD

Warranty: 1 Years

Certification: ISO/TS16949

Car Model: Ford

OE NO.: BM5G 6714 AA

Material: Filter Paper & Metal

Application: Engine Parts

Package: Neutral Packing

Quality: High-Quality

OEM: Acceptable

MOQ: 2000pcs

Q1: What's the MOQ?

A:1. Oil filter with metal: MOQ=2000pcs

2.Oil filter without metal: MOQ=2000pcs

3. Air filter: MOQ=2000pcs

4. Cabin filter: MOQ=2000pcs

Q2. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q3. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q4. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

Q5. How about your delivery time?

A: Generally, it will take 15-30days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q6. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q7. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.

Q8. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

Q9. What’s our shipping ways?

A: By sea, air, land.

Q10: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Copyright  2018  RSD Auto Parts
Sitemap   |   Support By Leadong