• Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
You are here: Home / Products / Oil Filter / Ford / Ford_Oil Filter_Ranger_Everest_Transit_ for Diesel Engines_BB3Q 6744 BA
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search

Product Detail

Share to:

Ford_Oil Filter_Ranger_Everest_Transit_ for Diesel Engines_BB3Q 6744 BA

resulting in poor oil supply and structural wear.we are oil filter wholesale and best oil filter china,you can know it.

Oil filter replacement step

Discharge waste engine oil

First discharge the waste engine oil in the fuel tank, place the old oil container under the oil pan, open the oil drain bolt, and discharge the waste oil. When draining the oil, try to let the oil drip for a while, and ensure that the waste oil is discharged clean. When the oil is used, it will produce a lot of impurities. If the discharge is not clean when it is replaced, it will easily block the oil passage, resulting in poor oil supply and structural wear.we are oil filter wholesale and best oil filter china,you can know it.

2. Remove the old oil filter

Move the old oil container under the filter and remove the old filter. Be careful not to let the waste oil stain the inside of the machine. Filter

3. Preparation of the oil filter before installation

There are two ways to install the oil filter. The common one is vertical installation, and there are many small digging machines that are installed horizontally. The installation method is different, so the filling of the oil is divided into two cases: firstly, the vertically installed oil filter is connected to the oil pump through a pipeline. This installation method generally recommends that the user change the oil filter to the filter. Filled with oil.

If the new oil filter is not filled with oil, air resistance will be generated inside the new filter element. When the vehicle is in the vehicle, the internal lubrication of the machine will be lack of oil for a short period of time, which will cause structural parts to wear. The advantage of the vertical installation is that the filter element has a better seal and there is very little oil leakage.

4. Install a new oil filter

Check the oil outlet of the oil filter installation position to clean the dirt and residual waste oil. Before installation, first put a sealing ring on the oil outlet, then slowly screw the new oil filter off. Pay attention to the oil filter not to be tightened too much. Generally, after tightening by hand, use it again. The wrench can be screwed 3/4 turns.

When installing a new filter element, do not use excessive force on the wrench, otherwise it will easily damage the seal ring inside the filter element, resulting in poor sealing effect and no filtering effect!

5. Fill the engine oil tank with new oil

Finally, inject new oil into the oil tank and, if necessary, use a funnel to prevent the oil from falling outside the engine. After the filling is completed, check the lower part of the engine for leaks. If there is no leak, check the oil dipstick and see if the oil is added to the line. We recommend adding it to the line. During the daily work, everyone should also check the dipstick regularly. If the oil is less than the lower line, it should be replenished in time.

Product Name: Oil Fiter

Brand Name: RSD

Warranty: 1 Years

Certification: ISO/TS16949

Car Model: Ford

OE NO.: BB3Q 6744 BA

Material: Filter Paper

Application: Engine Parts

Package: Neutral Packing

Quality: High-Quality

OEM: Acceptable

MOQ: 2000pcs

Q1: What's the MOQ?

A:1. Oil filter with metal: MOQ=2000pcs

2.Oil filter without metal: MOQ=2000pcs

3. Air filter: MOQ=2000pcs

4. Cabin filter: MOQ=2000pcs

Q2. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q3. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q4. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

Q5. How about your delivery time?

A: Generally, it will take 15-30days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q6. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q7. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.

Q8. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

Q9. What’s our shipping ways?

A: By sea, air, land.

Q10: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Copyright  2018  RSD Auto Parts
Sitemap   |   Support By Leadong